Athearn Marine Agency, Inc. – Marine Brokers for Commercial Fishing Boats and Permits East Coast United States

73 ft. 5 in., Steel Shrimp Dragger, (1998)

Listing # 11191NB


Hull TypeSteel
Length (LOA)73 ft.5 in.
Breadth23 ft.
Depth11 ft.5 in.
Draft10 ft.0 in.
Stern Width23 ft.
Year Built1998
Built ByIndustrie Marine de Caraquet
Hull Finished ByIndustrie Marine de Caraquet
RiggingShrimp Dragger,
Gross Tons149.48
Top Speed10
Cruise Speed9
CSI ExpiryApril 30, 2026
Send Offer or Inquiry



Hold Capacity: 130000 lbs of Iced Shrimp
Fuel: 35000 litres of Diesel
Freshwater: 2000 gallons


Main Engine: 849HP, Caterpillar 3508 Diesel
Engine Built: 1998
Engine Rebuilt: 2013 Top end rebuilt 2013
Transmission: Hunderstead variable pitch
Gear Ratio: 5.17:1
Shaft Size: 6"
Steering Type: Power dual ram
Bow Thrusters: Yes

Auxiliary Engines

Kubota - 50 KW Electricity
Caterpillar 3404 - 50 KW Electricity backup & hydraulic

Safety Equipment

X5 Survival suits
X5 Life jacquet
Co2 system in engine room
x4 Fire Extinguishers
Ovatek 7 Persons


Deep Freezer
Washing and Drying machine
This vessel have 6 bunks bed and 1 in Captain cabin


Radar: 2x Furuno
Plotter: Nobeltec & Olex with flat screen
Sounder: 2x Furuno
VHF: 2x Sailor Icom IC-M710, IC-R75, IC-M700, IC-M605
SSB: 2x Sideband
AutoPilot: Comnav
GPS: 2x Furuno GP-32, GP-33, GP-70, GP-80
VMS (Black Box): 1x
Alarm System: High bilge & fire alarm
Furuno Navtex NX-700
Sony radio system
Uniden scanner SC-780 XLT
Yosa JC-2204
Notus & Marport system for trawl & doors
Electronic throttle
Satellite phone receiver

Deck Equipment

2 x trawl winches with 750 fathoms - capacity 3/4
Steel a-frame
2 x net rollers
H-10 boom winch
2 x gallows
Steel mast
Fin stabilizer (6' x 12')
2 x PL5 stabilizer winches
5 x Gear-matic
2 x shrimp trawl
Pandalus 108 x with 2 x trawl doors
Fish tank with 14,000 lbs capacity
2 x hydraulic pump (complete)
Pilot valve for Nazareth
Water pump
2" valve for pumping system / 2" ball valve
Gasquet gear box & gear box for fish separator
Chain for the winch
Wheelhouse fan
Spare gasquet & spare turbo 3508
Electric motor
Door chain
Hydraulic pump lock washer & a spare hydraulic pump with 42 gallons
Spare belt for fish separator, spare belt for conveyor, & spare roller for conveyor
Balloune for power take-off
Belt for fish tank & conveyor
Bearing Yoyo Pollow Block
Filter for transmission & racor
Bolt for shaft tunnel
Rust defence and chain lube
Battery charger 12v
Hydraulic hose
Pilot valve
Duramax packing box
Spare power take off
With many more!
Shrimp box with 14000 lbs capacity
Shrimp conveyer
Shrimp table
A++ Bison Trawl doors
Fish seperator
Marport and Notus system for trawl and doors


2011 - Sandblasted and paint treated from the waterline to below.

2012 - Engine overhauled at 27,000 hours all except the crank shaft.

2014 - Replaced the pumping system with stainless steel (engine room), installation on fin stabilizers (9" x 12") cleaned and checked front fuel tank in the process.

2015 - Installed bow thruster; had the fish hold patched and gel coated in new, new twin trawl Pandalus 108, installed 2 x geat-matic PL5 and the gantry, another in the mast and one on the rear side of wheelhouse, new Furuno Radar, oil cooler on hydraulic system, oil cooler on the power steering fluid.

2016 - Big water to coolant heat exchanger on main engine.

2018 - Complete Notus System

2019 - Bycatch separator 

2021 - New surette battery on main engine 

2022 - New Kubota engine and generator, new battery, new 175 PSI heavy duty, 
2 x stage air compressor & air clutch system, new oil cooler on main engine with new coolant in 3 x engines. The kitchen, crew room & washroom has been stripped to the metal plate, all painted in new and rebuilt with brand new flooring and appliances. 
-This vessel also have refrigerated fishold


Price Reduction

Send Offer or Inquiry

** The information given is believed to be correct but cannot be guaranteed **