60' Duckworth Steel Longliner
Listing # LL6158
REDUCED PRICE
| When Available | Immediately |
| Hull Type | Steel |
| Length (LOA) | 60 ft. |
| Registered Length | 60 ft. |
| Breadth | 20 ft. |
| Depth | 8 ft.5 in. |
| Draft | 8 ft. |
| Year Built | 1989 |
| Built By | Duckworth Steel Boats |
| Rigging | Longliner, |
| Gross Tons | 68 |
| Cruise Speed | 9 |
Federal Permits |
Tri-Pack Swordfish, Tuna and Shark Permit |
Capacities |
Hold Capacity: 1350 cu ft. of Fuel: 4500 gallons of Diesel |
Propulsion |
Main Engine: 370HP, CAT 3406T Diesel Engine Built: 1989 Engine Rebuilt: 2019 Complete Transmission: Twin Disc 514C Gear Ratio: 5:1 Shaft Size: 6" Steering Type: Wagner Hydro |
Auxiliary Engines |
Yanmar - 40 KW Genset
Yanmar - 40 KW Genset
|
Safety Equipment |
6 Man Life Raft 1 Life Ring 3 Fire Extinguishers 4 Survival Suits |
Accommodations |
Galley n Deck (4) Berths (1) Cabin Washroom Shower Microwave Freezer Freshwater Maker Electric Stove |
Electronics |
Radar: Furuno 1935 Plotter: Simrad NSE12 and Furuno GD180 Sounder: Furuno FCV292 and Furuno GD180 VHF: (2) Icom's SSB: Icom M700 AutoPilot: Robertson AP35 GPS: Trimble and Simrad VMS (Black Box): Qualcomm Boatrax Dytek Model 2000 Sea Temp Simrad Weather Station Dell Optiplex DXA Computer with NEC Multi-sync LCD 1545V Simrad AIS Lindgren Pittman Buoy Transponder Locator |
Deck Equipment |
Hydro Longline Reel Trawl Winches Net Lifting Winch |
Comments |
Vessel Construction: Bottom Plate: 5/16" steel Side Plate: 1/4" steel Deck Plate: 1/4" steel Deck Frames: 2 1/2" flat bar steel Bottom frames: 3" flat bar steel, 21" on center - Main fish hold is approx. 1,350 cu ft (15' x 15' x 6') Rope Locker here is a pen in the forward fish hold which can be used as a rope locker and located directly under the starboard rail hauling station - Hard Chine, Rolling Chocks and Bulbous Bow Holds: Bait Freezer is approx. 540 cu ft (6' x 15' x 6') aft of main fish hold - The main was rebuilt in 2019 with 12,000 hrs. currently. Both Yanmar 40 kw gen sets were replaced new in 2021 (over $100,000).The vessel was also painted with a new freezer and water maker installed. Vessel was most recently hauled out in 2021 and is considered to be in above average to excellent condition. - The owner/operator has gone to great lengths to keep the vessel in tip-top shape. She is clean from stem to stern and every system and piece of equipment is in very good condition. - Vessel is heavily built and could be easily converted to a scalloper, offshore lobster/crabber or gillnetter. |
Price |
$800,000 $725,000 USD |
** The information given is believed to be correct but cannot be guaranteed **