Athearn Marine Agency, Inc. – Marine Brokers for Commercial Fishing Boats and Permits East Coast United States

82 ft. , Steel Shrimp Dragger, (0/2002)

Listing # 10536NL

Hull TypeSteel
Length (LOA)82 ft.
Breadth21 ft.
Depth10 ft.5 in.
Draft12 ft.
Stern Width14 ft.
Built ByMarine Industries-Sorel, QC
RiggingShrimp Dragger,
Gross Tons149.15
Top Speed13
Cruise Speed10
CSI ExpiryNov 14 2025
Send Offer or Inquiry



Hold Capacity: 115000 lbs of Iced Shrimp
Fuel: 6000 gallons of Diesel
Freshwater: 450 gallons


Main Engine: 671HP, Caterpillar 3412 Diesel
Engine Built: 2004
Transmission: Twin Disc
Gear Ratio: 5.03:1
Shaft Size: 5 1/2"
Propellor: 65" with Rice Kort Knozzle
Steering Type: Hydraulic

Auxiliary Engines

Cummins L-10, 300HP - hydraulics with a 60 gallon pump
Kubota - 27.5 KW Electricity
Kubota (2016) - 30 KW Electricity

Safety Equipment

Ovatek 7 person life raft
6 life jackets
2 life rings
5 survival suits
5 fire extinguishers


7 berths
3 cabins
Electric stove
Galley on deck
Electric heat in accommodations


Radar: 2 x Furuno
Plotter: Raytheon Raychart 610 video plotter
Sounder: Suzuki ES1025 & Furuno NavNet
VHF: Sailor; 2 x Scantic; Uniden
SSB: Sailor; 2 x Scantic; Uniden
AutoPilot: Robertson AP35
VMS (Black Box): Joubeh 1-tac
Alarm System: MS16 Monitoring
Stereo System: AM/FM radio
Computer with Nobletech system
Camera system
Uniden intercom
Notus net monitoring system 5 sensors
Loud Hailer
Uniden CB
Samsung TV

Deck Equipment

Hydraulic split trawl winches with 500 fathom of 3/4" wire cpacity
Galvanized steel Aframe
Aluminum mast
Anti Roll tank
Net lifting winch


2017 -  New 80 gallon piggy back hydraulic pump and net drum on slides.

2016- Vessel dry docked and completely painted.

2015 - Vessel was dry docked fuel tanks were cleaned and new generator installed.

2006- 2016 general maintenance on annual basis, vessel dry docked yearly and stored on dock in winter months.
 - New transmission was installed.

2004 - New Caterpillar main engine was installed.

2002 - This vessel was stripped to a bare open hull and rebuilt as NEW which included but not limited to a massive strip out to include bottom plating, decks, bulkheads and deckhouse/wheelhouse. The following work scope was completed during the vessel rebuild. Please note that this list represents major work completed and is not considered all inclusive.
 - Bottom plate and hull side steel renewal
 - Main/upper deck and bulkhead renewal
 - New wheelhouse and roll reduction tank
 - New interior arrangement, finishing's and furnishings
 - Vessel re-wiring
 - New piping systems (bilge, washdown, fire, hydraulic, domestic)
 - Fish hold refurbishment


Inquire for Price

Send Offer or Inquiry

** The information given is believed to be correct but cannot be guaranteed **